微波消解仪的配置清单

2017-08-09 10:08:22      点击:
微波消解仪配置清单  P/N  Description    一、主机规格及报价
微波加速反应系统主机描述及应用(包括以下1-12项)   MARS是具备精确化学反应过程控制的微波加速反应系统,其自动功率变频输出可应用于分析化学的样品消解、萃取、蛋白水解、浓缩、干燥、实验化学的有机合成、以及化学工艺模拟数据条件的中试。   The MARS system is able to automatically accelerate and control the process of chemical reaction according to the thermodynamic condition based on automatically power emission adjustable according to the real time thermodynamic response The following configuration will be applied for Sample preparation of Digestion in the Laboratory. It is also a perfect equipment for reporting, testing and optimization of Chemical condition parameters as a small prototype  reactor for research purpose.        1. 主机规格Main System Specifications   注:本仪器为一体化集成,生产质量管理经ISO-9000认证.  Note: The machine are integrated designing and with the certificate of ISO-9000.       1) 主机尺寸Overall Instrument Dimensions (63.5 D x 50.8 W x 58.4H),      2) 重量Weight:120lbs.(with vessels 146 lbs.),       3) 内腔体积Microwave Cavity with1.7 cubic foot,      4) 三向输出功率平台A 1600/800/400 Watt output base,       5) 非脉冲功率反馈调整0-100% increments on each base according to the reaction,      6) 显示屏Vacuum fluorescent display including a 64 x256 dot matrix,      7) 图形和数字显示功能Graphics and alpha/numeric capabilities,      8) 键盘Alpha/numeric keypad,       9) 复合镀层抗酸保护Heavy-duty, multi-layer (6)fluoropolymer coating,     10) 照明系统Halogen cavity lamp,      11) 输出入口Cavity inlet/outlet ports designed for other more applications,     12) 反应腔视窗 show to operator the situation of the vessels in reaction.      2. 紧急自动防爆保护门材料及结构The door designing of emergency release   外壳抗酸聚合材料 + 三层硬钢门结构,超感应冲击波自动防爆门在危险出现时能自动平行弹出提前释放横向压力冲击,保证横向人身安全.  The solid steel door constructed by one polymer layer of acid protection and three layer of heavy layers of steel for the maximum security. It also designed with inner springs loaded quadruple  safety door latch for the emergency pressure release.      3. 自动排风和冷却系统及规格Exhaust system:   由四组抗酸镀层风扇组成:1 pcs主风扇排风量5.8m3/s + 3 pcs冷却风扇加速冷却. Corrosion  resistant, Automatic flow control consist of 4 pcs fans with capabilities of 5.8 m3 of air flow per minute through the microwave cavity to remove by- products.      4. 一体化内置计算系统规格Internal Computer:本系统采用一体化内置计算系统无须外接计算机便可独立进行程序设定、过程控制、保存及打印等功能。Compatibility on-board computer controls all system functions, System can perform all functions with or without connection to an external PC. RS232,9-Pin, IBM PC compatible. 1 computer port, Printer Port 25-Pin Epson and IBM compatible.        5. 内存专家系统软件Intelligent Diagnostic software:   Internal Diagnostic Software-BITS System (Built-in Test System) Performs checks/monitors; line voltage, magnetron life, turntable operation, temperature control status/operation, exhaust system, halogen lamp life, door safety interlocks         6. 变频功率发射磁控管规格 The Stride magnetron of Auto power adjusting (CEM专利):  此机制磁控管发射能根据反馈温压变化1/120秒自动调频合适的微波发射功率,严格控制反应过程按预定的程序进行,此装置为CEM最新重要专利.  To control the reaction the magnetron is automatically power emission adjustable based on the 120Hz ( duty clycle) according to the real time thermodynamic data. fed back.   1) 发射主频Frequency 2455MHz,      2) 输出功率 power Output-(2500 watts installed power)1500 watts (IEC 705 Method – 1988)   3) 非脉冲自动功率调整Continuous Power 0-100%, available at all power base levels to provide more controlled exothermic reactions,   4) 调频发射时基Duty cycle 1/120 s ( equal to 120Hz),   5) 电气规格Electrical Requirements220/240V,50Hz, 15A@ 240V.      7. 固态晶体单向循环器 Solid Crystal cycling device ( U.S. Patent 4,835,354 CEM专利):   过载放射吸收和保护装置专利可保护磁控管和腔内IC电路、E-PROM在电磁辐射下正常工作,此装置为CEM重要专利。The isolator is able to absorb the microwave overload in the cavity to protect magnetron ,IC, E-PROM from the microwave radialization .(U.S. Patent 4,835,354)   1)电控系统辐射保护To prevent and reduce the possibility of the leakage of unacceptable microwave inside the cavity,   2)磁控管反辐射屏蔽To protect magnetron from Reflected energy, ensuring constant power output.      8. 系统安全监测保护装置 The monitoring designing of the system safety :   用于防止意外操作所引起的电磁泄漏和监测机器内部可能产生的微波泄漏对人机的伤害,The instrument complies with HHS standards under 21 CFR, Part 1030.10, Subparts(C)(1), (C)(2) and (C)(3).  1) 安全门三连锁Three independent door safety interlocks,   2) 连锁监控系统An interlock monitoring system,   3) 双重腔内泄漏热电偶传感器two independent thermal switches are used in each instrument to prevent instrument operation and microwave emissions in case of improper door closure or misalignment. 9.自控转盘设计规格及震动监测 Turntable designing:  以下为保障转盘安全操作的装置和设计:   1) 转动角度及均匀性PerfectCircleTW design provides absolute radial symmetry.Turntable rotates through a full 335o and then Reverses8.5 times per minute to ensure even vessel heating,  2) 震动监测装置Reacti-GuardTW Sensor continuous cavity monitoring system disables magnetron if cavity disturbances occur,   3) 光电位置检测The instrument is equipped with a optical sensor and turntable interlock system which causes the turntable to rotate when microwave power is on.        10. 本仪器所通过美国、加拿大、欧共体相关安全标准Emission and Safely Approvals:     U.S. and Canada Emissions & Safely- Complies with   1) FCC part 18(47 CFR part 18) Industrial, Scientific, and Medical Equipment  2) US: ETL* approved to UL standard3101 (Laboratory Equipment).   3) Canada:TEL** approved to standard CAN/CSA C22.2 No.1010.1 (Laboratory Equipment)         European Community Emissions & Safely- Conforms to   1) EC standard EN55011(Emissions for  industrial, Scientific, and Medical Equipment).  2) Conforms to EC standard EN50082-2(Electromagnetic Compatibility -Part 1)   3) Conforms to EC standard IEC 1010-1 (Safety requirements for electrical equipment of  measurement, control, laboratory use-part 1)      11. 本仪器所涉及美国相关专利Patents involved:   CEM Microwave Systems and Vessel may be covered by any one of the following U.S. patents: 04835354, 04080168, 05369034, 04672996, RE034373, 05230865, 04877624, 04672996,  05206479, 05427741. Other patents pending.       12. Mars Accessory Kit 相关随机附件  1) Operation Manual:  提供MARS操作手册 2) Spare parts for Vent Tubes:  排气管  3) Detachable Power Cord I.E. C.and U. L approved:  电缆  4) Spare Fuses,15A:  备用保险管,2只        二、检测系统规格及报价 The basic characteristics of the detection system:   All sensors including pressure and temperature sensing devices located within the microwave cavity are microwave-transparent or shielded to assure accurate readings and to eliminate arcing  (ignition)hazards. Service Accessibility one panel accesses to system main circuitry for  convenient service and upgrading capability. Approved by NIST standards      565735  双光路温度控制系统 Dual IR Temperature Control system   双光路温度控制系统实时控制全部压力罐内的温度(最多可达到40个压力罐),符合NIST标准,可以实现逐点标定.温度控制范围10-300°C。Temperature Control  System-Microwave-immune system for in situ measurement and control of temperature  inside all sealed sample vessels with NIST standard requirement.Temperature